SENERGY STUCCOBASE is a cement-based, fiber-reinforced base coat for Senergy Stucco System applications.
Features |
Benefits |
| Superior weathering properties |
Long-term durability |
| Proprietary formulation |
Improved moisture resistance and low water absorption |
| Fiber reinforced |
Resists shrinkage cracking when properly cured |
| Needs only addition of water and sand |
Easy to mix and use with consistent results |
| Concentrated for use with local sand |
Economical stucco application |
|
Uses
For use with the Senergy Stucco Wall System. Acceptable substrates include: concrete or unit masonry, Dens-Glass Gold (ASTM C1177), Fiberock Aqua-Tough Sheathing, water-resistant core gypsum sheathing (ASTM C79/ASTM C1396), cement-board (ASTM C1325 Type A Exterior) at a minimum 1/2 inch thickness, fiberboard ANSI/AHA A 194-85, plywood complying with US DOC PS 1-95, expanded polystyrene insulation board complying with ASTM C578 Type IV with nominal density 1.5 lbs/ft3 extruded polystyrene, and oriented strand board (OSB), complying with US DOC PS 2-95, to which a weather-resistive membrane and lath are attached.
|
Packaging
36.3 kg (80 lbs) per bag
Coverage
Coverage may vary depending upon surface conditions and application technique. 7.43–8.36 m2 (80–90 ft2) per 80 lb bag at a thickness of 3/8" to 1/2"
|
